Asynchronous control for two‐dimensional hidden Markovian jump systems with partly known mode observation conditional probabilities

This study focuses on the asynchronous control problem for two‐dimensional discrete‐time hidden Markovian jump systems where the mode observation conditional probability matrix is partly known. Considering the original system modes are invisible, the observed modes emitted from an observer serve as an alternative for stability analysis and controller design where a mode observation conditional probability matrix is constructed to characterize the emission between system modes and observed modes. Specially, only partly known information of the mode observation conditional probability matrix is accessible. With the introduction of the free‐connection weighting matrices, the asymptotic mean square stability criterion is firstly derived based on Lyapunov method. This introduction provides a further degree of relaxation and less conservatism is therefore achieved. Secondly, we present synthesis conditions for asynchronous state feedback controller design given in terms of a set of interconnected linear matrix inequalities. Moreover, cluster concept based on the partitions of observed modes is adopted which helps to decrease the number of controllers and simplify the design complexity. A numerical example, regarding the cases with and without clustering of the observed modes, is presented to illustrate the effectiveness of the proposed method.     

长江武惠堤堤防渗透破坏风险计算模型及应用

针对渗透水压力引起堤防渗透破坏问题,以堤防渗透破坏风险为目标,考虑堤防计算水位条件和土层渗透系数的不确定性,建立了堤防渗透破坏风险计算模型。以长江武惠堤17+750断面为例,对汉口水文站水位监测资料进行分析并拟合水位概率密度函数,对该断面渗流规律进行有限元分析,从而拟合渗透破坏概率密度函数,以此建立该断面堤防渗透破坏风险定量表达式。研究结果表明,武惠堤17+750断面堤防在警戒水位与防洪设计水位下,渗透破坏概率分别为0.442 9、0.764 0,渗透破坏风险分别为0.001 421、0.002 52;堤防渗透破坏风险随着堤外水位的升高而增加,但在防洪设计水位内运行时,堤防渗透破坏风险低,堤防渗流安全可得到有效控制。     

抄浆压包机控制方式和应用

介绍了压包机的工作原理、控制方式、逻辑联锁、液压系统以及压包机常见的故障和维修保养等。     

Identifying and Verifying Vulnerabilities through PLC Network Protocol and Memory Structure Analysis

Cyberattacks on the Industrial Control System (ICS) have recently been increasing, made more intelligent by advancing technologies. As such, cybersecurity for such systems is attracting attention. As a core element of control devices, the Programmable Logic Controller (PLC) in an ICS carries out on-site control over the ICS. A cyberattack on the PLC will cause damages on the overall ICS, with Stuxnet and Duqu as the most representative cases. Thus, cybersecurity for PLCs is considered essential, and many researchers carry out a variety of analyses on the vulnerabilities of PLCs as part of preemptive efforts against attacks. In this study, a vulnerability analysis was conducted on the XGB PLC. Security vulnerabilities were identified by analyzing the network protocols and memory structure of PLCs and were utilized to launch replay attack, memory modulation attack, and FTP/Web service account theft for the verification of the results. Based on the results, the attacks were proven to be able to cause the PLC to malfunction and disable it, and the identified vulnerabilities were defined.     

基于云概率密度分布估计的大坝监测数据分析

大坝运行监测易受自然环境和监测条件影响，存在时间和空间上的变异性，监测数据具有不确定性。以云理论的随机性和不确定性分析方法为基础，并与空间数据辐射思想相结合，建立了云滴概率密度分布估计模型，然后导出云概率密度分布函数，依据样本监测数据推求母体空间数据的分布特征，并设计了基于逆向云算法云变换的计算程序。分析陆浑水库1979~1999年测压管监测数据和位移变形数据的云概率密度分布特征和云数字特征，得出了20 a来大坝的数据分布特征和运行状态。监测数据分析结果表明，云概率密度分布估计不仅能有效合理地分析大坝的运行状态，而且能够依据云数字特征来判断监测状态和监测环境的异常变化。      

Integrated PLC-fuzzy PID Simulink implemented AVR system

Improving the transient response of power generation systems using automation control in a precise manner is the key issue. We design a fuzzy proportional integral derivative (PID) controller using Matlab and programmable logic controllers (PLCs) for a set point voltage control problem in the automatic voltage regulator (AVR) system. The controller objective is to maintain the terminal voltage all the time under any loads and operational conditions by attaining to the desired range via the regulation of the generator exciter voltage. The main voltage control system uses PLCs to implement the AVR action. The proposed fuzzy controller combines the genetic algorithm (GA), radial-basis function network (RBF-NN) identification and fuzzy logic control to determine the optimal PID controller parameters in AVR system. The RBF tuning for various operating conditions is further employed to develop the rule base of the Sugeno fuzzy system. The fuzzy PID controller (GNFPID) is further designed to transfer in PLCs (STEP 75.5) for implementing the AVR system with improved system response. An inherent interaction between two generator terminal voltage control and excitation current is revealed. The GNFPID controller configures the control signal based on interaction and there by reduces the voltage error and the oscillation in the terminal voltage control process. We achieve an excellent voltage control performance by testing the proposed fuzzy PID controller on a practical AVR system in synchronous generator for improve the transient response.     

Automatic brain tissue segmentation in MR images using hybrid atlas forest based on confidence-weighted probability matrix

The segmentation of specific tissues in an MR brain image for quantitative analysis can assist the disease diagnosis and medical research. Therefore, a robust and accurate method for automatic segmentation is necessary. Atlas-based-method is a common and effective method of automatic segmentation where an atlas refers to a pair of image consist of an intensity image and its corresponding label image. Apart from the general multi-atlas-based methods, which propagate labels through the single atlas then fuse them, we proposed a hybrid atlas forest based on confidence-weighted probability matrix to consider the atlases set as a whole and treat each voxel differently. In the framework, we first register the atlas to the image space of target and calculate the confidence of voxels in the registered atlas. Then, a confidence-weighted probability matrix is generated and it augments to the intensity image of the atlas or target for providing spatial information of the target tissue. Third, a hybrid atlas forest is trained to gather the features and correlation information among the atlases in the dataset. Finally, the segmentation of the target tissues is predicted by the trained hybrid atlas forest. The segment performance and the components efficiency of the proposed method are evaluated on the two public datasets. Based on the experiment results and quantitative comparisons, our method can gather spatial information and correlation among the atlases to obtain an accurate segmentation.     

A review on modeling of solar photovoltaic systems using artificial neural networks,fuzzy logic,genetic algorithm and hybrid models

The uncertainty associated with modeling and performance prediction of solar photovoltaic systems could be easily and efficiently solved by artificial intelligence techniques. During the past decade of 2009 to 2019, artificial neural network (ANN), fuzzy logic (FL), genetic algorithm (GA) and their hybrid models are found potential artificial intelligence tools for performance prediction and modeling of solar photovoltaic systems. In addition, during this decade there is no extensive review on applicability of ANN, FL, GA and their hybrid models for performance prediction and modeling of solar photovoltaic systems. Therefore, this article focuses on extensive review on design, modeling, maximum power point tracking, fault detection and output power/efficiency prediction of solar photovoltaic systems using artificial intelligence techniques of the ANN, FL, GA and their hybrid models. In addition, the selected articles on the solar radiation prediction using ANN, FL, GA and their hybrid models are also summarized. Total of 122 articles are reviewed and summarized in the present review for the period of 2009 to 2019 with 90 articles in the field of {ANN, FL, GA and their hybrid models} + solar photovoltaic systems and 32 articles in the field of {ANN, FL, GA and their hybrid models} + solar radiation. The review shows the suitability and reliability of ANN, FL, GA and hybrid models for accurate prediction of the solar radiation and the performance characteristics of solar photovoltaic systems. In addition, this review presents the guidance for the researchers and engineers in the field of solar photovoltaic systems to select the suitable prediction tool for enhancement of the performance characteristics of the solar photovoltaic systems and the utilization of the available solar radiation.     

A new realization scheme for dynamic PFSCL style

In this paper, a new scheme of logic function realization in dynamic positive feedback source-coupled logic (D-PFSCL) style is proposed. The existing scheme implements only NOR/OR based realization of a logic function. Thus, a complex function in D-PFSCL has high gate count which degrades the overall circuit performance measured in terms of power and delay. This paper therefore aims to resolve the issue by proposing a scheme which modifies the structure of a D-PFSCL gate. The modified gate exhibits AND/OR functionality and is used to realize various functions. Simulations have been carried out by implementing various functions and comparing their performance with the existing schemes at 1 GHz. The results of performance comparison with existing schemes indicates significant reuduction in gate count resulting in overall performance improvement.